Coffee Cup Wall Sign — Script Lettering with Steaming Cup, 3D Printed PLA

Every house has a coffee corner. Sometimes it's a whole cart with syrups lined up, and sometimes it's the bit of counter where the machine lives and the mugs pile up. Either way, the wall above it is usually blank. This fills it.

It's one solid piece, printed in PLA in my studio. "Coffee" runs across the top in a looping script. Below it, a curl of steam rises from a cup that sits on its saucer, with a heart cut through the front of the cup. The steam joins the lettering to the cup, so the whole design hangs as one shape, and the wall shows through the letters, around the handle and through the heart.

Why it's thick. Most printed signs are thin cutouts that disappear when you look at them from the side. This one is about half an inch deep, with raised, rounded edges on the lettering and the cup. It throws a real shadow on the wall, and it reads from across the kitchen, not just from up close.

Material: PLA
Finish: Single color
Form: Flat wall sign, one piece
Dimensions: 12.41 in wide × 10.83 in tall × 0.50 in thick (315.19 × 275 × 12.65 mm)
Hangs: Removable mounting strips on the back, or small nails through the openings
Made: Printed in my studio, one at a time. Each one takes about five hours on the printer
Care: Dust it with a dry, soft brush or cloth

Straight talk. This is decor. It isn't a diamond painting kit, and there's no hanging hardware in the box. PLA starts to soften at around 60°C (140°F). Don't hang it directly over a stove, a toaster, or the steam vent of an espresso machine, and keep it out of hot sunny windows. You'll see fine layer lines if you look closely, because that's how a 3D print is built.

The coffee's on. Now the wall knows it too.